Comparison Cart

Price list

Surface cleaning

Порошок на силикатной основе, растворимый в воде

 

 

1400 q
Price per kg not specified
Compare
Waterproofing
Elastic waterproofing chemical resistant epoxyurethane membrane

Epoxyurethane waterproofing membrane Himflex EPU 605 is used as a waterproofing and chemical resistant carpet underlay before fitting ceramic acid resistant tiles in workshops of industrial, food and chemical productions.

 

Membrane properties after hardening:

  • Free of solvents, with low emission of volatile compounds;
  • Elastic structure prevents fracturing and keeps elasticity in the temperature range from - 30º up to + 70º С;
  • Increased resistance to water, acid and alkali solutions, oil products and some types of solvents (see chemical resistance reference information).
15900 q
1060 rub/kg
Compare
12900 q
645 rub/kg
Compare
Epoxy primer

Two-part epoxy primer

 

For exterior and interior works

  • It is applied on dry substrates with a residual moisture content of no more than 10 %;
  • It is used to create a dust-free coating on concrete, a protective primer for the surface of metal, concrete and wood;
  • Primer for epoxy coatings (including polyurea).
15900 q
993.75 rub/kg
Compare

Epoxy water emulsion based primer

 

For exterior and interior works

 

  • It is applied on dry and wet substrates in absence of dripping moisture;
  • It is used to create a dust-free coating on concrete, a protective primer, a primer for epoxy coatings.
16500 q
1100 rub/kg
Compare
Chemical resistant sealants
Universal chemical strong sealing mastic
  • After rejection, the mastic has an elastic structure (a rubber-like material);
  • It is used to create protective coatings and fill compensation (temperature) joints;
  • Thixotropic structure, resistant to splashing, can be used on vertical surfaces;
  • It does not contain solvents and free NCO groups, the mastic is non-toxic after curing. It can be used inpremises, workshops of food production; 
  • Excellent impact resistance and resistance to high and low temperatures, easy to use$
  • Wide operating temperature range. Mastic exhibits stable properties at temperatures from -40° to +100° C;
  • High plasticity of the coating, which prevents the formation of cracks;
  • Strong adhesion to surfaces of various natures;
  • It is chemically resistant to water, alkali solutions, low-and medium-concentration acids, petroleum products, certain types of solvents;
  • No resistance to oils.
2900 q
580 rub/kg
Compare
Caulking compound

Chemical resistant two-pack caulking compound, epoxy composition

 

For exterior and interior works

  • High mechanical strength and adhesion to various types of substrates, resistance to abrasive wear;
  • Caulking compound is a good filling volume without the formation of shrinkage cracks;
  • Good resistance to medium and low concentration mineral acids, alkalis, water, oils, fats and petroleum products;
  • Limited resistance to certain types of solvents.
1850 q
370 rub/kg
Compare
Tile joint grout

Chemical resistant tile joint grout, epoxy, two-part

 

For exterior and interior works

  • High mechanical strength (compressive strength 90MPa), resistance to abrasive wear and no shrinkage cracks;
  • It allows to create long-lasting seams that are resistant to most mineral and organic acids of low and medium concentration with a pH level of 3.6-14, alkalis, petroleum products, some solvents and water;
  • Suitable for food processing premises.
1900 q
380 rub/kg
Compare

Chemical resistant tile joint grout, epoxy, two-part

 

For exterior and interior works

  • High mechanical strength (compressive strength 90MPa), resistance to abrasive wear and no shrinkage cracks;
  • It allows to create long-lasting seams that are resistant to most mineral and organic acids of low and medium concentration with a pH level of 3.6-14, alkalis, petroleum products, some solvents and water;
  • Suitable for food processing premises.
2400 q
480 rub/kg
Compare

Chemical resistant tile joint grout for joints of acid resistant tile, epoxy, two-part

 

Color: light-grey, brown

 

For exterior and interior works

  • High mechanical strength and resistance to abrasive wear, no shrinkage cracks;
  • Accelerated strength gain in the early stages of hardening, which is important for existing production facilities;
  • No smell when mixing the components (low emission of volatile substances);
  • Resistance to most chemical reagents with a pH level from 3.6 to 14: mineral acids of low and medium concentration (up to 50 %) organic acids of low concentration (up to 15 %), alkali solutions (up to 50 %), petroleum products, oils, fats and water;
  • Suitable for food processing premises with alternating exposure to organic acids, alkalis and water;
  • Hygiene and resistance to fungal lesions.
1800 q
360 rub/kg
Compare
Chemical resistant tile joint grout, epoxy, with increased heat resistance
 
For exterior and interior works
  • High mechanical strength, heat resistance (+120° C) and resistance to abrasive wear;
  • It allows to create long-lasting seams that are resistant to most mineral acids of medium and low concentrations, alkalis, water (at t 100° C), water vapor, oils and petroleum products, and some solvents;
  • Suitable for food processing premises.
2750 q
550 rub/kg
Compare
Tile adhesive

Обладает демпфирующим действием. Вероятность повреждения плитки при ударной нагрузке ниже, чем у стандартных эпоксидных клеев, имеющих более «жесткую структуру».

- Без запаха. Очень низкое содержание ЛОС (летучих органических соединений)

- Высокая адгезия к различным типам оснований, штучным изделиям из различных типов керамики, керамогранита, мозаики, натурального камня, плавленого базальта и стали.

- Позволяет наносить клеевой состав на поверхности, подверженные вибрации
- Водонепроницаемость и морозостойкость

- Широкий диапазон температуры эксплуатации

- Минимальная усадка (наличие сухого остатка после полимеризации смолы 98 %) и отсутствие усадочных трещин

- Высокая пластичность готового клеевого состава после смешивания компонентов

- Химическая устойчивость к действию кислот низкой и средней концентрации. растворов щелочей, воде, нефтепродуктам и некоторым растворителям (см. лист химической стойкости)

3600 q
360 rub/kg
Compare

Paste-like tile adhesive based on modified epoxy resin with chemical resistance and resistance to abrasive wear

 

Color: light-grey

 

For exterior and interior works

 

The life time after mixing components is 45 minutes.

  • Very high mechanical strength, increased adhesion to various types of substrates, resistance to abrasive wear and no shrinkage (98% dry residue);
  • No smell when mixing the components (low emission of volatile substances);
  • Accelerated strength gain in the early stages of hardening, which is important for existing production facilities. Pedestrian load in 10 hours after laying, full chemical, mechanical load in 3-4 days);
  • Resistance to most chemical reagents with a pH level from 3.6 to 14: mineral acids of low or medium concentration (up to 50 %) organic acids of low concentration (up to 15 %), alkalis, petroleum products, oils, fats and water;
  • Suitable for food processing premises with alternating exposure to organic acids, alkalis, water.
3550 q
355 rub/kg
Compare

Paste-like adhesive for tiles based on modified epoxy resin with improved performance properties

 

Color: light gray

 

For exterior and interior works

 

The life time after mixing the components is 60 minutes

  • Very high mechanical strength, increased adhesion to various types of substrates, resistance to abrasive wear and no shrinkage (98% dry residue);
  • No smell when mixing the components (low emission of volatile substances);
  • Good resistance to most chemical reagents with a pH level from 3.6 to 14: mineral acids of medium concentration (up to 50 %) organic acids of low concentration (up to 15 %), alkalis, petroleum products, oils, fats and water;
  • Suitable for food processing premises with alternating exposure to organic acids, alkalis and water.
3600 q
360 rub/kg
Compare

Paste-like tile adhesive based on modified epoxy resin with increased heat resistance

 

Color: light-grey

 

For exterior and interior works

 

The life time after mixing the components is 45 minutes.

  • Ultra-high mechanical strength, increased adhesion to various types of substrates, resistance to abrasive wear, impact resistance and heat resistance (with tile coating up to + 120° C);
  • It allows to create high-strength adhesive compounds that are resistant to most mineral and organic acids of various concentrations, alkalis, petroleum products, oils, fats, certain types of solvents and water, including hot water and water vapor;
  • Suitable for food processing premises.
4300 q
430 rub/kg
Compare

Paste-like adhesive for tiles based on epoxy-polyurethane resins

 

Color: White

 

For exterior and interior works

  • After curing, it forms a firm-elastic adhesive seam;
  • Increased adhesion to various structural materials and complex surfaces (concrete, metal, wood, chipboard, glass, basalt, granite, natural stone, stone veneer), shows resistance to mineral acids of low and medium concentration, organic acids of low concentration (up to 15 %), alkalis, water, water saturated solutions;
  • It has the properties of elasticity, allows to apply finishing materials on vibrating surfaces;
  • It does not contain solvents and water in its composition;
  • It does not stain natural stone and does not create internal stresses.
3300 q
660 rub/kg
Compare

Paste-like adhesive for tiles based on epoxy-polyurethane resins

 

Color: White

 

For exterior and interior works

  • After curing, it forms a firm-elastic adhesive seam;
  • Increased adhesion to various structural materials and complex surfaces (concrete, metal, wood, chipboard, glass, basalt, granite, natural stone, stone veneer), shows resistance to mineral acids of low and medium concentration, organic acids of low concentration (up to 15 %), alkalis, water, water saturated solutions;
  • It has the properties of elasticity, allows to apply finishing materials on vibrating surfaces;
  • It does not contain solvents and water in its composition;
  • It does not stain natural stone and does not create internal stresses.
6200 q
620 rub/kg
Compare
Acid resistant tile
0 q
Price per kg not specified
Compare
0 q
Price per kg not specified
Compare
0 q
Price per kg not specified
Compare
605 q
Price per kg not specified
Compare
Epoxy resin hardener
Наливной пол

Эпоксидный наливной пол применяется для устройства наливных покрытий на бетонные или аналогичные им по прочности основания в общественных и производственных помещениях.

 

Эпоксидный наливной двухкомпонентный пол используется для получения наливных покрытий пола с высокими эксплуатационными свойствами: теплостойких (до +7°С), гидроизоляционных, противокоррозионных и химически стойких с высокой механической прочностью, твердостью  стойкостью к абразивному износу.

 

Свойства:

  • Высокая механическая прочность;
  • Высокая химическая устойчивость;
  • Адгезия и износостойкость;
  • Водостойкость и водонепроницаемость;
  • Не содержит в своем составе растворителей;
  • Без запаха, с низкой эмиссией летучих веществ;
  • Глянцевый внешний вид.

 

0 q
Price per kg not specified
Compare